|
Back to Minquip Products
'Click on Picture to en- Large Certificate'
AMDEL PRESSURE TEST CERTIFICATES Click
on picture below to see each Certificate. .jpg) .jpg) Click on Picture to see Large Certificate
1.
Minquip A Hose Couplings fitted with Minquip (patented) bellows seal
versus Minsup Hose Couplings fitted with Minsup seals to determine force to
interlock couplings and to determine torque to turn interlocked couplings. Click
on Picture to see Large Certificate
2.
Test Specification: AS 1180.5D-1972 Section 5. Hydrostatic
pressurisation at 500 psi for 5 minutes of 1" Minquip Type A Male / Female
couplings fitted with Minquip (patented) 70 duro Bellows Seal. Click
on Picture to see Large Certificate
3.
Test Specification: AS 1180.5D-1972 Section 5. Hydrostatic
pressurisation until failure of 1" Minquip Type A Male / Female
couplings fitted with Minquip (patented) 70 duro Bellows Seal. Click
on Picture to see Large Certificate
4.
Minquip Medium Safetyloc Hose End Couplings
Pressurise to 50psi for 10 minutes
hydrostatically, pressurise to 600psi for 10 minutes then to maximum pressure. Click
on Picture to see Large Certificate
5.
Minquip Medium Safetyloc Couplings Male and Female
Pressurise to 50psi for 10 minutes
hydrostatically, pressurise to 600psi for 10 minutes then to maximum pressure. Click
on Picture to see Large Certificate
6.
Minquip Small Safetyloc 1" Male coupling Pressurise to 50psi for 10 minutes
hydrostatically, pressurise to 600psi for 10 minutes then to maximum pressure. Click
on Picture to see Large Certificate
7.
Minquip 1" BSP full flow ball valve - The coupling was fitted to a pressure
hose to allow pressurisation and the assembly was subjected to hydrostatic
pressurisation at a rate of approximately 3.5 Mpa/min until failure. Click
on Picture to see Large Certificate
8.
Destruction test of own sheave block 6 inch Minquip single Sheave Block with
hook headfitting. Click
on Picture to see Large Certificate
9.
Safety - Air Water Hose Assemblies - A Safety Overview, Recommended Purchasing
Parameters check list. |