Back to more Minquip Products
AIR VORTEX PUMP
Change the way you dewater. No expensive and dangerous power runs.
Fully variable pumping. Large volume quickly for emergency break outs. low
maintenance. low capital cost. High head capablilty.
.jpg)
The ATS MD VORTEX PUMP model p4-50-650 is the only portable pneumatic pump
capable of pumping highly contaminated liquids with high concentrations of
solids and sludges.
Due to the following features:
- Unique inverted impeller sucks liquids in from the top of the pump housing
and not from the traditional bottom position; this eliminates the need for
high pressure seals in the motor housing.
- Outstanding pumping ie. 750l/min and a head of in excess of 50m (see
chart)
- Extreme low weight and excellent compact ergonomic design
- Low noise levels (lowest in class)
- Built in micro filter and lubricator for extended motor life.
- Easy to carry.
- Simple fuss free maintenance, repair and operations.
- High chrome involute and impeller (optional) for even longer life.
- Stainless steel motor cylinder eliminates rusting and extends the life of
the pump, under tough conditions.
Specifications
| Overall Hight |
490mm |
| Overall Width |
340mm |
| Weight |
14kg |
| Power Rating |
3kw |
| Working Pressure |
350-620KPA |
| Air Inlet |
32/35mm |
| Water Outlet |
50mm |
| Swage Nipple Outlet |
50mm |
| Maximum Head @ 620kpa Air Pressure |
50m |
| Maximum Flow Rate @ 620kpa Air Pressure |
750 l/min |
| Maximum Head @ 400kpa Air Pressure |
40m |
| Maximum Flow Rate @ 400kpa Air Pressure |
400 l/min |
| Model Number |
Description |
| P4-50-750 |
Vortex Sump Pump with STD Cast Iron Involute Housing and
Impeller |
| P4-50-75HC |
Vortex Sump Pump with 12% Chrome Cast Iron Involute Housing
and Impeller |
| .jpg)
